Back to Resource Hub
    Guide
    ESG Reporting

    VSME explained: the EU voluntary sustainability reporting standard, its modules and the 2027 value chain cap

    VSME is the EU's voluntary sustainability reporting standard for smaller companies outside the CSRD. It has a Basic Module (B1 to B11) and an optional Comprehensive Module (C1 to C9). From financial years starting 1 January 2027, CSRD reporters cannot ask value chain companies with up to 1,000 employees for more than the standard covers.

    Last updated 16 November 2026 · By Ella Sustainability Team

    Get started

    What is VSME?

    VSME stands for Voluntary Sustainability Reporting Standard for non-listed SMEs. EFRAG built it and delivered it to the European Commission on 17 December 2024. The Commission then adopted a Recommendation on 30 July 2025 encouraging large companies and banks to base their sustainability requests to smaller businesses on it. In 2026 the standard moved from guidance into law. Commission Delegated Regulation (EU) 2026/1560 of 3 July 2026 sets sustainability reporting standards for voluntary use by undertakings protected by the value chain cap. It was published in the Official Journal on 21 September 2026 alongside the revised ESRS (Delegated Regulation (EU) 2026/1563). Using it is still voluntary. No company is forced to publish a VSME report, and there is no assurance requirement. What changed is the other side of the relationship: large companies in CSRD scope now have a legal ceiling on what they can demand from smaller companies in their value chain.

    Who is VSME for?

    The standard is written for companies that are not themselves required to report under the CSRD. After the Omnibus I changes (Directive (EU) 2026/470), the CSRD applies to companies with more than 1,000 employees and more than EUR 450 million net turnover, so the group of companies that can use VSME is now much wider than the original SME label suggests. In practice three groups use it: 1. Suppliers that keep receiving ESG questionnaires from large customers and want one answer they can reuse. 2. Companies asked for sustainability data by their bank or investors. 3. Subsidiaries and newly acquired entities that need a consistent baseline before group reporting catches up. UK companies can use it too. It is a common format that European customers increasingly recognise, even though UK law does not require it.
    Who is VSME for?
    CompanyDoes VSME apply?What it means in practice
    In CSRD scope (over 1,000 employees and over EUR 450m turnover)No, it reports under ESRSCan only ask protected value chain companies for what VSME covers
    Up to 1,000 employees, not in CSRD scopeYes, voluntarilyProtected by the value chain cap from FY2027
    UK company selling into EU groupsYes, voluntarilyA recognised format for answering EU customer requests
    Very small company (10 employees or fewer)Yes, voluntarilySome datapoints, including energy and emissions, are optional

    The VSME modules: Basic and Comprehensive

    VSME has two modules. The Basic Module is the entry point. The Comprehensive Module adds datapoints on top of it and can only be used once the Basic Module is applied. The Basic Module covers B1 and B2 (basis for preparation, practices and policies) and basic metrics B3 to B11. The Comprehensive Module covers C1 to C9, which are the topics banks and large customers ask about most often beyond the basics: strategy, climate targets and transition, climate risks and human rights.
    The VSME modules: Basic and Comprehensive
    DisclosureBasic Module topicDisclosureComprehensive Module topic
    B1Basis for preparationC1Business model and strategy
    B2Practices, policies and future initiativesC2Description of practices, policies and future initiatives
    B3Energy and greenhouse gas emissionsC3GHG reduction targets and climate transition
    B4Pollution of air, water and soilC4Climate risks
    B5BiodiversityC5Additional (general) workforce characteristics
    B6WaterC6Human rights policies and processes
    B7Resource use, circular economy and wasteC7Severe negative human rights incidents
    B8Workforce: general characteristicsC8Revenues from certain sectors and exclusion from EU reference benchmarks
    B9Workforce: health and safetyC9Gender diversity ratio in the governance body
    B10Workforce: remuneration, collective bargaining and training
    B11Convictions and fines for corruption and bribery

    What does VSME B3 ask for on energy and emissions?

    B3 is the disclosure most customers care about, because it feeds their own Scope 3 inventory. It asks for: 1. Total energy consumption in MWh, split between renewable and non-renewable sources. 2. Gross Scope 1 emissions in tonnes of CO2 equivalent. 3. Gross location-based Scope 2 emissions in tonnes of CO2 equivalent. 4. GHG intensity: gross emissions divided by turnover, in EFRAG's 2024 text. Scope 3 is not required in the Basic Module. The Comprehensive Module says that a company choosing to report Scope 3 should refer to the 15 GHG Protocol categories. If your customers want your Scope 3, VSME lets you add it, but it does not make you. Our view: the Scope 1 and 2 numbers are rarely the hard part. The hard part is proving them. Every customer that receives your VSME report will eventually ask where a number came from, so keep the bill, meter read or invoice behind each line from the start.
    What does VSME B3 ask for on energy and emissions?
    B3 datapointUnitTypical source
    Total energy consumptionMWhElectricity and gas bills, fuel cards, meter reads
    Renewable vs non-renewable splitMWhSupplier tariff details, REGO or guarantee of origin evidence
    Scope 1 emissionstCO2eGas, fuel and refrigerant data with emission factors
    Scope 2 emissions (location-based)tCO2eElectricity consumption with grid factors (DESNZ factors in the UK)
    GHG intensitytCO2e per unit of turnoverScope 1 and 2 total divided by turnover
    Scope 3 (optional, Comprehensive)tCO2eSpend and activity data across the 15 categories

    What is the value chain cap and when does it apply?

    The value chain cap is the part of Omnibus I that matters most to large companies. Companies in CSRD scope cannot require companies in their value chain that did not exceed an average of 1,000 employees in the preceding financial year to provide more than the datapoints listed in the voluntary standard. Delegated Regulation (EU) 2026/1560 entered into force on 24 September 2026. The cap itself applies to financial years beginning on or after 1 January 2027, according to Arendt and Garrigues. The cap only limits requests made for CSRD purposes. It does not stop requests made under other EU or national laws. For a sustainability team at a large company this changes the supplier questionnaire. A 200-question survey sent to a 300-person supplier now has to be cut back to what VSME covers, or the supplier can decline the rest. We wrote more on that in our blog on what large companies can still ask suppliers.
    What is the value chain cap and when does it apply?
    MilestoneDateSource
    EFRAG delivers VSME to the Commission17 December 2024EFRAG
    Commission Recommendation on VSME30 July 2025European Commission
    Delegated Regulation (EU) 2026/1560 adopted3 July 2026EUR-Lex
    Published in the Official Journal21 September 2026Arendt, Garrigues
    Entry into force24 September 2026Arendt, Garrigues
    Value chain cap appliesFinancial years from 1 January 2027Arendt, Garrigues

    VSME vs ESRS vs CSRD: what is the difference?

    The CSRD is the law that decides who must report. ESRS are the detailed standards those companies report against, revised and cut by more than 60% of mandatory datapoints in 2026. VSME is the much shorter voluntary standard for everyone below the CSRD line. The three fit together. A large company reports under ESRS, and when it needs data from smaller suppliers for its own value chain disclosures, VSME sets the ceiling on what it can ask for.
    VSME vs ESRS vs CSRD: what is the difference?
    CSRD with ESRSVSME
    Who uses itCompanies over 1,000 employees and EUR 450m turnoverCompanies outside CSRD scope, voluntarily
    Mandatory?Yes, for companies in scopeNo
    Double materiality assessmentRequiredNot required
    AssuranceLimited assuranceNot required
    Scope 3Required where materialOptional, Comprehensive Module
    Typical lengthDozens of disclosure requirements11 basic disclosures, 9 optional comprehensive ones

    How to prepare a VSME report

    A first VSME report is usually a few weeks of work if the data exists, and a few months if it sits with ten people who are busy doing something else. 1. Decide on Basic only or Basic plus Comprehensive. Ask your largest customers and your bank what they actually want. 2. List every datapoint and name the person who holds it: facilities for energy, finance for turnover and fines, HR for workforce, health and safety for incidents. 3. Collect the evidence with the number: bills, meter reads, payroll exports, training logs. 4. Calculate Scope 1 and 2 with current emission factors and keep the factor version. 5. Write the B2 narrative on practices and policies from what you actually do. 6. Review, publish and keep a copy of every source for the next customer request. One pattern from a recent call with a UK services group is worth repeating. When the group added entities in Germany and France, the new entities ran the same processes as the UK business but could not prove them with tracked data, and an external assessment marked them down for it. VSME will expose the same gap. The policies transfer easily. The evidence does not.
    How to prepare a VSME report
    StepOwnerEvidence to keep
    Scope the reportSustainability leadCustomer and bank requests that set the scope
    Energy and emissions (B3)Facilities and financeBills, meter reads, fuel cards, factor version
    Workforce (B8 to B10)HRHeadcount report, payroll summary, training records
    Health and safety (B9)H&S managerIncident log and hours worked
    Corruption and bribery (B11)Legal or financeStatement of convictions and fines
    Narrative (B2)Sustainability leadPolicies with dates and owners

    How Ella helps with VSME

    Ella is AI-native ESG reporting software built as an agent, and VSME is one of the frameworks its ESG reporting module covers. It starts the report as a list of data requests rather than a blank template. Ella sends collect links to the people who hold each datapoint, tracks who has not replied and chases them. People drag in bills, receipts, payroll exports and spend files in any format, and integrations pull the rest. Ella's carbon module calculates Scope 1 and 2 from that activity data, and every number keeps a link to the source it came from, so the same data set answers the next customer questionnaire, CDP or EcoVadis request. For large companies on the other side of the value chain cap, Ella runs supplier surveys built around the VSME datapoints and tracks missing responses, so you ask for what you are allowed to ask for and actually get it back.

    How Ella helps

    Related resources

    Guide
    ESG Reporting

    CSRD after the Omnibus: who is in scope, the new thresholds and the reporting timeline

    After the Omnibus I Directive, CSRD applies only to EU companies with more than 1,000 employees and over EUR 450 million net turnover, plus non-EU groups with EUR 450 million EU turnover. Most newly in-scope companies report on financial years starting in 2027, using simplified ESRS, with limited assurance only.

    Guide
    ESG Reporting

    ESG data collection software: how to collect ESG data without chasing spreadsheets

    ESG data collection software gathers the energy, emissions, workforce and governance data a sustainability report needs from the people and systems that hold it. Good tools request data from named owners, chase them, read invoices and bills, pull from integrations, and keep a source on every number so the final report is audit-ready.

    Guide
    Carbon

    Scope 1 and 2 emissions explained: definitions, examples and how to calculate them

    Scope 1 emissions come from sources your company owns or controls, such as gas boilers, company vehicles and refrigerant leaks. Scope 2 emissions come from the electricity, heat, steam or cooling you buy. You calculate both by multiplying activity data, like kWh or litres, by an emission factor, then report Scope 2 two ways: location-based and market-based.

    Guide
    ESG Reporting

    Double materiality assessment explained: how to do one under the revised ESRS in 2026

    A double materiality assessment is the process CSRD reporters use to decide which sustainability matters to report. A matter is material if the company has a significant impact on people or the environment (impact materiality), if it creates financial risks or opportunities (financial materiality), or both. The revised ESRS now also allow a top-down approach.

    Frequently Asked Questions

    What is VSME?

    VSME is the EU's Voluntary Sustainability Reporting Standard for non-listed SMEs, developed by EFRAG. It gives smaller companies a standard way to report sustainability information to customers, banks and investors. Since 2026 it has been set in law by Delegated Regulation (EU) 2026/1560, though using it remains voluntary.

    Is VSME mandatory?

    No. No company is required to publish a VSME report and there is no assurance requirement. What is mandatory is the value chain cap: from financial years starting 1 January 2027, CSRD reporters cannot require value chain companies with up to 1,000 employees to provide more than the standard covers.

    What is the difference between the VSME Basic and Comprehensive modules?

    The Basic Module (B1 to B11) covers basis for preparation, practices and policies, energy and emissions, pollution, biodiversity, water, waste, workforce and anti-corruption. The Comprehensive Module (C1 to C9) adds strategy, climate targets and transition, climate risks, human rights and governance diversity. You must apply Basic before Comprehensive.

    Does VSME require Scope 3 emissions?

    No. The Basic Module asks for energy use and gross Scope 1 and location-based Scope 2 emissions. Scope 3 is optional and sits in the Comprehensive Module, where companies that report it should refer to the 15 GHG Protocol Scope 3 categories.

    What is the VSME value chain cap?

    It is a limit introduced by Omnibus I. Companies in CSRD scope cannot require companies in their value chain that did not exceed an average of 1,000 employees in the preceding financial year to provide more than the datapoints in the voluntary standard. It applies to financial years beginning on or after 1 January 2027.

    Can UK companies use VSME?

    Yes. VSME is voluntary and open to any company. UK suppliers selling to EU groups are likely to receive VSME-based requests from 2027, so reporting against it once gives a reusable answer for EU customers alongside UK requirements such as SECR.

    How long does it take to prepare a VSME report?

    If the data is already collected, a Basic Module report can take a few weeks. Most of the time goes on collecting energy bills, HR and finance data from different owners and keeping the evidence behind each number. Software that requests and chases the data shortens that part most.

    What is the best software for VSME reporting?

    Look for software that collects each datapoint from the person who holds it, calculates Scope 1 and 2 from bills and invoices, and keeps a source on every number. Ella is ESG reporting software built as an AI agent that does this for VSME, CSRD, CDP and EcoVadis from one data set.

    Book a demo with our team

    Speak to our team about how Ella can help your organisation.